from Ubiquiti Networks is an airMAX PowerBeam 2.4/5GHz Gen 2 device,
featuring a built-in Wi-Fi radio for easy remote setup an accessibility.
Ubiquiti Networks airMAX PowerBeam Gen 2 is an ideal product for CPE
deployments requiring maximum performance. Utilizing InnerFeed
technology to integrate the radio into the feedhorn of the antenna,
there is now need for extra cables, improving performance thanks to no
cable loss. It requires no tools for assembly, requiring only a single
wrench for pole-mounting.
The PowerBeamÃ‚ AC integrates a separate Wi-Fi radio for fast and easy
setup using your mobile device.
Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the PowerBeamÃ‚ AC
offers a more robust mount with a convenient lifting loop or handle.
Integrated Radio Design
UbiquitiÃ¢s InnerFeedÃ‚ technology integrates the radio into the feedhorn
of an antenna, so there is no need for cables to connect the radio to
the antenna. This improves performance because it eliminates cable
Plug and Play Installation
The PowerBeamÃ‚ AC requires no tools for assembly; only a single wrench
is required for pole-mounting.
airMAXÃ‚ ac products offer improved latency, noise immunity, scalability
and significantly increased throughput performance.
Ubiquiti’s airMAXÃ‚ engine with custom IC dramatically improves TDMA
latency and network scalability. The custom silicon provides hardware
acceleration capabilities to the airMAX scheduler, to support the high
data rates and dense modulation used in airMAX ac technology.
Incredible Antenna Ã¢BeamÃ¢ Performance
The form factor of the PowerBeamÃ‚ AC features the highest gain for its
size. The PowerBeam ACÃ¢s excellent beam directivity provides the best
performance in high-noise environments.
Dimensions: 420 x 420 x 230mm (16.54 x 16.54 x 9.06″)
Weight: 2.22kg (4.89lbs)
Power Supply: 24V, 0.5A Gigabit PoE Adapter (included)
Max. Power Consumption: 8.5W
Power Method: Passive PoE (Pairs 4,5+;7,8 Return)
Supported Voltage Range: 20 to 26VDC
Networking Interface: (1) 10/100/1000 Ethernet Port
Processor Specs: MIPS 74Kc
LEDs: Power, Ethernet, (4) Signal Strength
PtP Mode: 10/20/30/40/50/60/80MHz
PtMP Mode: 10/20/30/40MHz
Antenna Feed: Outdoor UV Stabilized Plastic
Dish Reflector: Powder-Coated SPCC
Mounting: Pole-Mounting Kit (included)
Wind Loading: 380N @ 200km/h (85.4lbf @ 125mph)
Wind Survivability: 200km/h (125mph)
ESD/EMP Protection: Air: Ã‚24kV / Contact: Ã‚24kV
Operating Temperature: -40 to 70Ã‚C (-40 to 158Ã‚F)
Operating Humidity: 5 to 95% non-condensing
RoHS Compliance: Yes
Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G
Vibration Test: IEC 68-2-6
Temperature Shock Test: IEC 68-2-14
UV Test: IEC 68-2-5 at 40Ã‚C (104Ã‚F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G
Certifications: CE, FCC, IC
Operating Frequency: 2412 – 2472MHz / 5150 – 5875MHz