- High performance bridge for 10(100)Base-T Ethernet extension
- Fully compatible with IEEE 802.3 and Ethernet Standards
- E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK
- Ethernet Port: 10Mbps, Full/Half Duplex Mode compatible
- Ethernet ports support MDI/MDI-X selectionable
- Allow transmitting and receiving VLAN data packet
- 15000 frames per second filtering and forwarding rate
- 1000 MAC address LAN table, and automatic LAN table learning and aging
- Standalone and Module optional
- Power of Chassis: 2 Slots for slide in power supplier module, AC or DC power supplier module, Redundant Power supported
- AC220V±20% or DC-48V power input
- LAN port
Standard: Conforms to IEEE802.3 / 10(100)Base-T Ethernet
Data rate: 10Mbps(20Mbps/10Base-T in Full duplex topology)
Compatible on Full/Half duplex topology
Connectors: RJ-45 Connector
Transfer distance: <150m - E1 port
Standard: ITU G.703, G.704,
Jitter Performance: According to ITU G.823
Bit rate: N×64Kbps, N=1~31 (Fractional Mode) or 2.048Mbps(Full Mode)
Line Code: HDB3
Line Impedance: 75/120ohms optional
Pulse Amplitude: Nominal 2.37V±10%
- Voltage: AC 220V±20% or DC -48V
- Power Consumption: <3 Watts
- Temperature: 0-50℃
- Humidity: 0-90%(non-condensing)
- Size: (Width: from left to right)
Standalone: 272mm(Width)× 139mm(Deep)× 41mm(High)
Chassis: 438mm(Width)× 252mm(Deep)× 178mm(High)
>
There are no reviews yet.