Cambium PTP 550E | Connectorised Outdoor Multicore Gigabit Radio – Performance in the presence of Interference(C050055H018A)
PTP 550 is a Point to Point Gigabit throughput solution based on 802.11ac Wave 2 operating in 5 GHz wireless space, addressing the gigabit capacity needs for high speed backhaul solutions in short range and middle range applications provides up to 1.36 Gbps throughput with ARQ and asymmetric non-contiguous channel aggregation across 5 GHz band. The PTP 550 solution draws its attributes from Cambium Networks’ Point to Point products such as PTP 650/670 and PTP 450i. Each PTP 550 radio is enclosed in a rugged IP66/67 rated metal enclosure, which protects the radio from extreme conditions and solar radiation.
₦1,046,954.91
The Cambium PTP 550E is a point-to-point (PTP) microwave radio that operates in the 5 GHz unlicensed band. It is a high-performance radio that can provide up to 1.4 Gbps of throughput with very low latency. The PTP 550E is ideal for a variety of applications, including backhaul for cellular networks, enterprise networks, and ISPs.
Some of the key features of the PTP 550E include:
- High throughput: up to 1.4 Gbps
- Low latency: 2.2-6 ms
- Dynamic Channel Selection (DCS): automatically selects the best channel for optimal performance
- AES 128 encryption for security
- Carrier Aggregation: allows for multiple channels to be bonded together for increased throughput
- Rugged IP66/67 rated enclosure for outdoor use
The PTP 550E is easy to install and manage. It comes with a built-in web interface and a variety of management tools, including Cambium’s cnMaestro cloud-based management platform.
The PTP 550E is a popular choice for a variety of applications, including:
- Cellular backhaul
- Enterprise backhaul
- ISP backhaul
- Government networks
- Public safety networks
- Educational networks
- Healthcare networks
If you are looking for a high-performance, reliable, and easy-to-manage PTP microwave radio, the Cambium PTP 550E is a great option to consider.
| brands |
|---|
MODEL PTP 550 Connectorized
PTP 550 Integrated
RF BANDS Wide-band operation 5.1 to 5.9 GHz (Allowable frequencies and
bands are dictated by individual country regulations)
5170 – 5320 MHz
5520 – 5980 MHz
NUMBER OF RADIO’s Two (2) independent radios 2×2:2 (each 2 streams), 4 streams total
(4X4 MIMO)
CHANNEL SIZES Dual independent channels, each channel configurable as 10, 20,
40 & 80 MHz
SPECTRAL EFFICIENCY 8.5 bps/Hz maximum
CHANNEL SELECTION Fixed frequency or Dynamic Channel Selection (DCS)
MAXIMUM TRANSMIT POWER Up to 26 dBm
SYSTEM GAIN Up to 173 dB with Integrated Antenna
MODULATION MCS 0 to MCS 9 (256 QAM 5/6)
DUPLEX SCHEME Time Division Duplex (TDD)
Multiple transmit/receive duty cycles
ANTENNA
Connectorized: Single or Dual-polarity antennas using 2xN-type
connectors
RANGE Up to 122 miles (200 km)
UL/DL Ratio supported 50:50 , 70:30 and 75:25
SECURITY FIPS 197 compliant 128-bit AES Encryption
Factory mode recovery
ETHERNET BRIDGING
LATENCY 3 ms one direction
PACKET CLASSIFICATION Layer 2 and Layer 3 IEEE 802.1p, Ethernet priority, VLAN
QUALITY OF SERVICE 3 Level of QoS
MAX PACKET SIZE 1700 Bytes
TDD Sync Supports CMM5 and cnPulse
FLEXIBLE I/O 1 Gigabit Port: Data + PoE power input
1 SFP port (single-mode fiber, multi-mode fiber, and copper
Gigabit Ethernet options available)
MANAGEMENT
NETWORK MANAGEMENT In-Band management and Out-Band Management
SYSTEM MANAGEMENT IPv6/IPv4 dual-stack management support
SNMPv2 and SNMPv3, https, WPA-PSK2
Online spectrum analyzer (no impact on payload traffic)
cnMaestro supported
INSTALLATION Built-in e-alignment using GUI on radio to assist in installati
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
You have not viewed any product yet.
There are no reviews yet.