The DS-3E1105P-EI/M is a Smart Managed Series 4-Port Fast Ethernet Smart PoE Switch from Hikvision. It is a small, fanless switch that is perfect for small and medium-sized businesses. It supports 4 x 10/100 Mbps PoE ports and 1 x 10/100 Mbps RJ45 port. It has a switching capacity of 1 Gbps and a packet forwarding rate of 0.74 Mpps. It also has a 2K MAC address table and a 768 Kbits internal cache.
The DS-3E1105P-EI/M is a versatile switch that can be used for a variety of applications, including:
Connecting IP cameras
Connecting wireless access points
Connecting VoIP phones
Connecting other network devices
It is also easy to manage using Hikvision’s web-based management interface.
Here are some of the key features of the DS-3E1105P-EI/M:
4 x 10/100 Mbps PoE ports
1 x 10/100 Mbps RJ45 port
1 Gbps switching capacity
0.74 Mpps packet forwarding rate
2K MAC address table
768 Kbits internal cache
Fanless design
Web-based management interface
SNMP v1/v2c support
CLI (Command Line Interface) access
Here are some of the benefits of using the DS-3E1105P-EI/M:
Increased network efficiency
Improved network security
Reduced power consumption
Reduced noise
Easy to manage
If you are looking for a small, affordable, and easy-to-manage PoE switch, the DS-3E1105P-EI/M is a great option.
Here are some additional specifications for the DS-3E1105P-EI/M:
Dimensions: 121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”)
Weight: 0.26 kg (0.573 lb)
Power consumption: < 6 W
Operating temperature: 0°C to 50°C (32°F to 122°F)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
PoE Power PinEnd-span: 1/2(-), 3/6(+),8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 16
Max. Port Power30 W
PoE Power Budget130 W
Software Function
Long Range
Ports 1 to 16: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 1 aggregation groups.
Port Isolation/
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
PoE Watchdog/
System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c for third-party management platform access.
Support port mirroring for fault locating.
QoS/
Storm Control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through
Off by default.
Loop Prevention/
VLAN/
Port Rate-Limiting/
IGMP Snooping/
ACL/
IPSG/
General
ShellMetal material
Net Weight1.8 kg (4.0 lb)
Gross Weight3.0 kg (6.6 lb)
Dimensions (W × H × D)335.00 mm × 44.50 mm × 226.00 mm (13.19” × 1.75” × 8.90”)
Operating Temperature0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Power Supply100-240 VAC, 50/60 Hz, Max. 2.5 A
Installation ModeRack (equipped with mounting ears)
Max. Power Consumption150 W
Power Consumption In Idle10 W
Surge Protection6 KV
Approval
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
There are no reviews yet.