The Grandstream CloudUCM Plus is a cloud-based PBX solution for small and growing businesses. It supports up to 50 extensions and 16 simultaneous calls, with built-in meetings, messaging, and CRM integration—all managed securely without hosting fees.
Switches, Transmission & Display Products
Hikvision DS-3E1326P-EI/M | 24 Port Fast Ethernet Smart POE Switch
Availability:
Out of stock
Hikvision 24 Port Fast Ethernet Smart POE Switch
₦246,896.26
Out of stock
-
The DS-3E1326P-EI/M is a 24-port Fast Ethernet Smart PoE switch manufactured by Hikvision. It’s designed for small and medium businesses and organizations needing a reliable and affordable way to connect network devices.
Here are its key features:
Ports:
- 24 x 10/100 Mbps PoE RJ45 ports
- 2 x Gigabit combo ports (RJ45 + SFP)
Power over Ethernet (PoE):
- Supports IEEE 802.3at/af standards
- Delivers up to 30W of power per port
- 6 kV surge protection for PoE ports
- Extend mode allows AF/AT cameras to reach up to 300 meters
Switching performance:
- 14.8 Gbps switching capacity
- 11.01 Mpps packet forwarding rate
- 4 Mbits internal cache
- 16 K MAC address table
Management:
- Web-based management interface
- Hik-Central Pro and Hik-Partner Pro support
- SNMP v1/v2c support
- CLI (Command Line Interface) access
Other features:
- Cable detection for abnormal open circuits, short circuits, and cable length
- 802.1ab LLDP support for simplified device discovery and configuration
- Metal housing for durability
- Fanless design for quiet operation
Technical specifications:
- Dimensions: 440 x 232 x 44 mm
- Weight: 3.5 kg
- Power consumption: < 40 W
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Storage temperature: -40°C to 70°C (-40°F to 158°F)
- Operating humidity: 10% to 90% (non-condensing)
- Storage humidity: 5% to 90% (non-condensing)
| brands |
|---|
-
-
- Network Parameters
- Ports16 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port
- MAC Address Table16 K
- Switching Capacity7.2 Gbps
- Packet Forwarding Rate5.36 Mpps
- Internal Cache4 Mbits
- PoE Power Supply
- PoE StandardIEEE 802.3af,IEEE 802.3at
- PoE Power PinEnd-span: 1/2(-), 3/6(+),8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE PortPoE: Ports 1 to 16
- Max. Port Power30 W
- PoE Power Budget130 W
- Software Function
- Long Range
Ports 1 to 16: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
- VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
- Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 1 aggregation groups.
- Port Isolation/
- HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
- PoE Watchdog/
- System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c for third-party management platform access.
Support port mirroring for fault locating.
- QoS/
- Storm Control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.
- DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through
Off by default.
- Loop Prevention/
- VLAN/
- Port Rate-Limiting/
- IGMP Snooping/
- ACL/
- IPSG/
- General
- ShellMetal material
- Net Weight1.8 kg (4.0 lb)
- Gross Weight3.0 kg (6.6 lb)
- Dimensions (W × H × D)335.00 mm × 44.50 mm × 226.00 mm (13.19” × 1.75” × 8.90”)
- Operating Temperature0 °C to 45 °C (32 °F to 113 °F)
- Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity5% to 95% (no condensation)
- Relative Humidity5% to 95% (no condensation)
- Power Supply100-240 VAC, 50/60 Hz, Max. 2.5 A
- Installation ModeRack (equipped with mounting ears)
- Max. Power Consumption150 W
- Power Consumption In Idle10 W
- Surge Protection6 KV
- Approval
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- SafetyUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- ChemistryCE-RoHS (2011/65/EU)
-
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
You may be interested in View All
-
Cisco Wireless
Cisco WAP571-E-K9 1.9Gbps dual concurrent Access Point
Specifications at a Glance
Key Features Details Wi-Fi standard 802.11ac Wave 1 Radios Dual radio, 2.4 GHz and 5 GHz Data rate 1300 Mbps 11ac + 600 Mbps 11n Maximum associated clients 256 per radio Access points per cluster 16 WAP571E access points Interface 2xGE Ethernet port with link aggregation (LAG) support SKU: WAP571-E-K9
There are no reviews yet.