WS-POE-16-48v240w passive 16 port POE Injector for 16 IP cameras, VOIP phones or Access Points

Remote power up to 16 Access points, phones or cameras – see
also 8 and 12 port versions

Allways On – passive Power over Ethernet (POE) technology –
48v 120watts total for all devices

supports 802.3af devices in passive mode, 30 watts per port

Rack Mountable 16 port PoE injector

Extend power to 328 ft or 100 meters

This device offers

* 16 RJ45 jacks with Data + Power out

* 16 RJ45 jacks Data in – connect to any switch

* 2.1mm x 5.5mm DC power jack

* LED power status

* 10/100 operation

* 48 volt, 120watt power supply included (100-240v autosense,
50/60hz, UL / CE approved)

Used to provide PoE power to:

* IP phones like Polycom, Fanvil, Cisco, Yealink  

* WiFi Access points

* IP Cameras

* 802.3af devices

These devices provide power on the spare data wires in the
ethernet cable. 120 Watts is available at 48 volts – all devices
receive the same voltage – total of all devices is 120 watts. Check
device specs for power needs, it is under 4 watts for most Phones,
other devices need more