Cisco Small Business WAP371-E-K9 Wireless-AC/N Dual Radio Access Point with Single Point Setup

Cisco

 

  • Concurrent dual-band radio support up to 900 Mbps per radio to maximize capacity and coverage.
  • 3×3 multiple-input multiple-output (MIMO)
  • 802.11ac/n Wireless Access Point

 

251,577.43

High-Performance, Easy-to-Deploy, and Highly Secure Business-Class Wireless-AC Connectivity.

  • Provides cost-effective 802.11ac connectivity up to three times the 802.11n speed
  • Supports 3 x 3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance
  • Gigabit Ethernet LAN interface with Power over Ethernet (PoE) facilitates flexible installation
  • Captive portal helps enable highly secure guest access with customized roles and rights
  • Single Point Setup requires no controller, for easy cost-effective deployment of multiple access points
  • Works right out of the box with easy installation and simple web-based configuration and wizard

Features

  • Concurrent dual-band radio support up to 900Mbps per radio to maximize capacity and coverage.
  • 3 x 3 multiple-input multiple-output (MIMO) with three spatial streams allows maximum performance.
  • Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points – without requiring additional hardware.
  • The Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network.
  • Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information.
  • Captive portal support facilitates highly secure, customized guest access with multiple rights and roles.
  • Simple installation and intuitive web-based configuration and wizard facilitate fast, simple deployment and setup in minutes.
  • Support for PoE allows for easy installation without expensive additional wiring.
  • Sleek design with multiple internal antennas and versatile mounting kit allows for installation on a ceiling, wall, or desktop.
  • Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
  • Power-saving sleep mode and port control features help maximize energy efficiency.
  • Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
  • Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.
  • Limited lifetime hardware warranty provides peace of mind.

How to Configure Captive Portal on WAP371


How to Configure Seamless Roaming on WAP371

SKU: WAP371-E-K9 Category:
brands

Model

Brand
Cisco Small Business
Model
WAP371-E-K9

Details

Standards
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Wireless Data Rates
Up to 1.3Gbps
Frequency Band
2.4 GHz / 5 GHz
Antenna
Internal antennas optimized for installation on a wall or ceiling
Interface
10/100/1000 Ethernet, with support for 802.3af/at PoE
LEDs
Power, WLAN, LAN
Buttons
Reset button

Features

Features
Concurrent dual-band radio support up to 900 Mbps per radio to maximize capacity and coverage.

3×3 multiple-input multiple-output (MIMO) with three spatial streams allows maximum performance.

Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points – without requiring additional hardware.

The Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network.

Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information.

Captive portal support facilitates highly secure, customized guest access with multiple rights and roles.

Simple installation and intuitive web-based configuration and wizard facilitate fast, simple deployment and setup in minutes.

Support for PoE allows for easy installation without expensive additional wiring.

Sleek design with multiple internal antennas and versatile mounting kit allows for installation on a ceiling, wall, or desktop.

Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.

Power-saving sleep mode and port control features help maximize energy efficiency.

Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.

Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades

Dimensions & Weight

Dimensions
1.69″ x 9.05″ x 9.05″ (H x Wx D)
Weight
1.81lbs

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.